SMOK IPX 80 Pod System Mod Kit 3000mAh Best In UAE – vapezepower.com

SMOK IPX 80 Pod System Mod Kit 3000mAh Best in UAE – 80W RPM 2 Vape Kit

The SMOK IPX 80 Pod System Mod Kit 3000mAh in UAE is a durable high-capacity pod mod designed for adult users who want adjustable power, a large rechargeable battery, MTL and DTL coil options, precise airflow control, and a rugged body in one device.

Powered by a 3000mAh built-in rechargeable battery, the IPX 80 delivers adjustable output from 1W to 80W and uses a large 5.5ml RPM 2 refillable pod. The standard kit includes an RPM 2 Mesh 0.16Ω coil for higher-output DTL vaping and an RPM 2 DC 0.6Ω MTL coil for a tighter, lower-power draw.

The device also features IP67-rated protection, adjustable airflow, a 0.96-inch display, USB Type-C charging up to 1.4A, and a wide 0.15Ω–3.0Ω resistance range, making it considerably more adjustable than a basic compact pod kit.

Key Features of SMOK IPX 80

• Brand: SMOK
• Model: IPX 80
• Product Type: Pod Mod Kit
• Battery Capacity: 3000mAh
• Battery Type: Built-In Rechargeable
• Output Power: 1W–80W
• Pod Capacity: 5.5ml
• Pod Type: IPX 80 RPM 2 Pod
• Included Coil 1: RPM 2 Mesh 0.16Ω
• Included Coil 2: RPM 2 DC 0.6Ω MTL
• Coil Platform: SMOK RPM 2
• Airflow: Adjustable
• Protection Rating: IP67
• Display: 0.96-Inch Screen
• Charging: USB Type-C
• Maximum Charging Current: 1.4A
• Output Voltage: 0.5V–4.0V
• Resistance Range: 0.15Ω–3.0Ω
• Dimensions: 107 × 34.8 × 34.5mm
• Weight: Approx. 130g
• Vaping Styles: MTL / RDL / DTL
• E-Liquid Included: No
• Nicotine Included: No

What Is the SMOK IPX 80?

The SMOK IPX 80 is a refillable pod-mod device that combines features normally associated with both pod systems and larger adjustable vape mods.

Unlike simple fixed-output pods, the IPX 80 allows users to:

• Adjust wattage
• Adjust airflow
• Replace coils separately
• Refill the pod
• View settings on a screen
• Recharge the internal battery
• Switch between MTL and DTL coil options

This gives the IPX 80 significantly more control than a basic draw-activated pod kit.

Large 3000mAh Built-In Battery

The IPX 80 contains a:

3000mAh Built-In Rechargeable Battery

This is one of its main advantages over smaller pod devices.

The larger battery is designed to support both moderate-power MTL use and higher-output vaping approaching the device’s 80W maximum.

Actual battery life depends on:

• Wattage
• Coil resistance
• Puff duration
• Puff frequency
• Battery age

Using the 0.16Ω Mesh coil at higher wattage consumes battery power more quickly than using the 0.6Ω MTL coil.

Adjustable 1W–80W Output

SMOK officially rates the IPX 80 at:

1W to 80W

This wide range allows the device to support very different coil configurations.

Higher-power RPM 2 coils can be used for more open DTL vaping, while higher-resistance coils allow lower-output operation.

5.5ml RPM 2 Pod

The standard IPX 80 kit includes a:

5.5ml RPM 2 Pod

This refillable cartridge provides considerably more capacity than compact 2ml pod systems.

A smaller 2ml version also exists in regulated markets.

The 5.5ml version currently listed by vapezepower.com is the standard UAE configuration.

RPM 2 Coil Platform

The IPX 80 uses:

SMOK RPM 2 Coils

The RPM 2 family is separate from SMOK’s original RPM coil platform.

Current RPM 2 options include:

• RPM 2 Mesh 0.16Ω
• RPM 2 DC 0.6Ω MTL
• RPM 2 DC 0.25Ω

Always choose a coil specifically marked RPM 2 for the IPX 80 RPM 2 pod.

RPM 2 Mesh 0.16Ω Coil

The standard kit includes:

RPM 2 Mesh 0.16Ω

This is the higher-output option intended primarily for:

• DTL vaping
• Larger vapor production
• Warmer vapor
• More open airflow

Its mesh structure provides a wide heating surface designed for quicker and more even heating.

RPM 2 DC 0.6Ω MTL Coil

The second included coil is:

RPM 2 DC 0.6Ω MTL

This option is designed around:

• Mouth-to-lung vaping
• Lower power
• Tighter draw
• Lower vapor production
• More restricted airflow

It provides a very different experience from the 0.16Ω Mesh coil.

0.16Ω vs 0.6Ω RPM 2 Coils

Important: RPM 2 Is Not Original RPM

SMOK sells two different coil families with similar names:

RPM
and
RPM 2

They should not be treated as automatically interchangeable.

The IPX 80 standard pod is designed around:

RPM 2 Coils

Do not purchase an original RPM coil only because the names look similar.

Adjustable Airflow

The IPX 80 includes a dedicated:

Adjustable Airflow System

The airflow ring allows users to change how much air enters the device.

Opening the airflow generally gives:

• Looser draw
• Better cooling at higher wattage
• More DTL-style operation

Restricting the airflow gives:

• Tighter draw
• More resistance
• Better suitability for MTL use

IP67 Protection

One of the defining IPX 80 features is its:

IP67-Rated Protection

SMOK designed the device to provide additional resistance against:

• Water exposure
• Dust
• Everyday impacts and drops

This makes the IPX 80 more rugged than many standard pod systems.

IP67 protection should not be treated as permission to deliberately submerge, abuse, or expose the device to harsh conditions unnecessarily.

0.96-Inch Display

The IPX 80 includes a:

0.96-Inch Display

The screen provides important operating information including settings such as:

• Wattage
• Battery level
• Coil resistance
• Puff information

This makes adjustment easier than pod systems that rely only on LED lights.

USB Type-C Charging

The built-in battery recharges through:

USB Type-C

SMOK officially specifies:

Maximum 1.4A Charging Current

with approximately:

5V charging voltage

There is no need to remove or replace a battery cell.

Wide Resistance Range

Official resistance support is:

0.15Ω–3.0Ω

This allows the chipset to recognize a broad range of compatible coil resistances, although the exact installed pod and coil must still be designed for the IPX 80 system.

Refillable Pod Design

Unlike a disposable vape, the IPX 80 is designed for repeated use.

Users can:

• Recharge the battery
• Refill e-liquid
• Replace the coil
• Continue using the main device

Only the consumable coil requires regular replacement.

Prime a New RPM 2 Coil

Whenever installing a fresh coil:

1. Insert the compatible RPM 2 coil firmly into the pod.
2. Fill the cartridge with suitable e-liquid.
3. Allow approximately 5–10 minutes for the wick to absorb liquid.
4. Start at a suitable lower wattage.
5. Increase gradually if required.

Using a dry new coil can cause immediate burnt flavor and permanent wick damage.

Suitable E-Liquid for the 0.16Ω Coil

The RPM 2 Mesh 0.16Ω coil is designed for higher-output DTL vaping.

Compatible higher-VG freebase formulations are commonly used with this type of coil.

A formulation such as:

70VG / 30PG

may be suitable depending on the e-liquid manufacturer.

High-strength nicotine should not be automatically paired with a high-vapor DTL coil.

Suitable E-Liquid for the 0.6Ω MTL Coil

The 0.6Ω DC MTL coil uses a more restricted, lower-power configuration.

Balanced pod-friendly e-liquids may be more appropriate for this setup.

The suitable nicotine concentration depends on:

• Coil
• Wattage
• Vapor output
• Individual nicotine tolerance

IPX 80 vs SMOK RPM 2

The SMOK RPM 2 device and IPX 80 share RPM 2 coil technology, but the IPX 80 places stronger emphasis on rugged construction and airflow control.

The IPX 80 adds features such as:

• IP67 protection
• 3000mAh battery
• Adjustable airflow ring
• 80W maximum output

IPX 80 vs SMOK Nord 4

Both are adjustable pod devices, but their cartridge ecosystems differ.

The IPX 80 provides the larger battery and rugged IP-rated chassis.

Compact but Rugged Dimensions

Official dimensions are:

107 × 34.8 × 34.5mm

with a weight of approximately:

130g

This makes the device larger than a slim MTL pod but compact compared with many traditional high-power box-mod kits.

Available Colors

The current vapezepower.com listing includes colors such as:

• Black Carbon Fiber
• Blue
• Fluid 7 Color
• Fluid Black Gray
• Gray
• Red

Color availability can change according to stock.

What’s Included in the SMOK IPX 80 Kit?

The official standard kit contains:

• 1 × SMOK IPX 80 Device – 3000mAh
• 1 × IPX 80 RPM 2 Pod – 5.5ml
• 1 × RPM 2 Mesh 0.16Ω Coil
• 1 × RPM 2 DC 0.6Ω MTL Coil
• 1 × USB Type-C Cable
• 1 × User Manual

No bottled e-liquid or nicotine is included.

SMOK IPX 80 Specifications

Why Choose SMOK IPX 80 Pod Mod Kit?

The SMOK IPX 80 Pod System Mod Kit combines high battery capacity with adjustable power and rugged construction.

Key characteristics include:

• Large 3000mAh battery
• Up to 80W output
• 5.5ml refillable pod
• RPM 2 coil platform
• 0.16Ω Mesh coil included
• 0.6Ω MTL coil included
• Adjustable airflow
• IP67 protection
• 0.96-inch display
• USB Type-C charging
• MTL and DTL flexibility
• Replaceable coils
• Refillable design

SMOK IPX 80 Price at vapezepower.com

At the time this product was checked, vapezepower.com lists the SMOK IPX 80 Pod Mod Kit at AED 115.

Prices can change according to stock, promotions, color, or retailer updates, so the live product page should remain the final reference for current pricing.

The current vapezepower.com listing also identifies:

• 3000mAh battery
• 5–80W wording on the retail description
• 5.5ml pod
• RPM 2 0.16Ω coil
• RPM 2 0.6Ω MTL coil
• Adjustable airflow
• IP67 protection
• Type-C charging

SMOK’s own current specification gives the full output range as 1–80W, so that is the specification used in this page.

Who Is the SMOK IPX 80 For?

This kit may suit adult users searching for:

• SMOK IPX 80 UAE
• SMOK IPX80 Dubai
• IPX 80 3000mAh UAE
• SMOK IPX 80 80W
• SMOK RPM 2 Pod Kit
• IPX 80 5.5ml UAE
• SMOK IP67 vape Dubai
• SMOK 3000mAh pod mod
• IPX80 vapezepower
• SMOK vape kit UAE

Frequently Asked Questions

What battery does the SMOK IPX 80 use?

It contains a 3000mAh built-in rechargeable battery.

What is the maximum power?

SMOK officially rates the IPX 80 at 1W–80W.

How much e-liquid does the pod hold?

The standard UAE version contains a 5.5ml RPM 2 pod.

Which coils are included?

The kit includes RPM 2 Mesh 0.16Ω and RPM 2 DC 0.6Ω MTL coils.

Does the IPX 80 use original RPM coils?

The standard IPX 80 RPM 2 pod is specifically designed for the RPM 2 coil platform. Do not assume original RPM coils are interchangeable.

Does the IPX 80 support MTL vaping?

Yes. The included RPM 2 DC 0.6Ω MTL coil is designed for a more restricted mouth-to-lung draw.

Can the IPX 80 be used for DTL vaping?

Yes. The included RPM 2 Mesh 0.16Ω coil is the higher-output DTL option.

Does the IPX 80 have adjustable airflow?

Yes. It features a rotating airflow-control system.

Is the IPX 80 waterproof?

It carries an IP67 protection rating, but it is better described as water- and dust-resistant rather than treating it as indestructible or safe for deliberate submersion.

Does it have a screen?

Yes. It uses a 0.96-inch display.

Does it use Type-C charging?

Yes. Maximum charging current is officially listed at 1.4A.

Can the battery be removed?

No. The 3000mAh battery is built into the device.

Does the pod use replaceable coils?

Yes. RPM 2 coils are separately replaceable.

Does the standard kit include e-liquid?

No. The hardware kit contains no e-liquid or nicotine.

SMOK IPX 80 Pod System Mod Kit at vapezepower.com UAE

The SMOK IPX 80 Pod System Mod Kit 3000mAh Best in UAE combines a large 3000mAh rechargeable battery, up to 80W output, 5.5ml RPM 2 pod, adjustable airflow, IP67-rated protection, 0.96-inch display, RPM 2 Mesh 0.16Ω and DC 0.6Ω MTL coils, and USB Type-C charging in a durable refillable pod-mod platform.

When buying the SMOK IPX 80 online in Dubai, Abu Dhabi, Sharjah, Ajman, or across the UAE, make sure the product is the original IPX 80 3000mAh RPM 2 version and check the current vapezepower.com page for live color availability and price.

At the time checked, vapezepower.com lists this kit at AED 115, although prices and inventory may change.

For adults aged 18+ only. This device contains no e-liquid or nicotine. If used with nicotine-containing e-liquid, nicotine is an addictive substance.