SMOK IPX 80 Replacement Empty Pod Cartridge 5.5ml 3pcs/pack Best In UAE

SMOK IPX 80 Replacement Empty Pod Cartridge 5.5ml 3PCS Best in UAE

The SMOK IPX 80 Replacement Empty Pod Cartridge 5.5ml in UAE is a refillable replacement cartridge designed specifically for the SMOK IPX80 Pod Mod Kit. With a generous 5.5ml e-liquid capacity, side-filling system, magnetic connection, transparent PCTG construction, integrated duck-billed mouthpiece, and replaceable-coil design, it provides a practical way to keep an existing IPX80 device in regular use without replacing the complete kit.

SMOK manufactures the IPX80 cartridge in two separate versions: the IPX 80 RPM 2 Pod, which accepts RPM 2 replacement coils, and the IPX 80 RPM Pod, which accepts original RPM replacement coils. Each manufacturer-standard package contains 3 empty pods, with coils and e-liquid sold separately.

Key Features of SMOK IPX 80 Replacement Pod

• Brand: SMOK
• Series: IPX 80
• Product Type: Empty Refillable Replacement Pod
• Pod Capacity: 5.5ml
• Pack Size: 3 Pods
• Available Versions: RPM 2 Pod / RPM Pod
• RPM 2 Pod Compatibility: SMOK RPM 2 Coils
• RPM Pod Compatibility: Original SMOK RPM Coils
• Filling System: Side Fill
• Fill Closure: Silicone Stopper
• Pod Material: PCTG
• Mouthpiece: Integrated Duck-Billed Design
• Pod Connection: Magnetic
• Coil Installation: Press-Fit
• Integrated Coil: No
• Refillable: Yes
• Primary Device Compatibility: SMOK IPX 80
• Coils Included: No
• E-Liquid Included: No
• Nicotine Included: No

What Is the SMOK IPX 80 Replacement Pod?

The SMOK IPX80 Replacement Pod is the empty cartridge that holds e-liquid and a separately installed replacement coil inside the IPX80 system.

Unlike integrated-coil cartridges, the heating coil is not permanently built into this pod.

Instead, users can:

• Refill the cartridge
• Remove a worn coil
• Install a fresh compatible coil
• Continue using the same pod while it remains in good condition
• Keep spare cartridges for different e-liquids

This design can be more flexible than replacing the complete pod every time a coil wears out.

5.5ml E-Liquid Capacity

The standard IPX80 pod holds:

5.5ml of E-Liquid

SMOK officially identifies both the IPX 80 RPM 2 Pod and IPX 80 RPM Pod in the 5.5ml series.

The larger reservoir is useful because the IPX80 supports both higher-output DTL coils and lower-power MTL options.

A 2ml regional/TPD version also exists, so UAE sellers should make sure their product page matches the physical stock.

3 Empty Pods Per Pack

SMOK’s manufacturer guidance lists:

3PCS Per Pack

for both:

• IPX 80 Empty RPM 2 Pod
• IPX 80 Empty RPM Pod

These are empty replacement cartridges.

A standard replacement box does not include:

• Replacement coils
• E-liquid
• Nicotine

The correct coil must be purchased separately.

Two Different IPX80 Pod Versions

This is the most important compatibility point.

The IPX80 platform has two visually similar cartridge options:

IPX 80 RPM 2 Pod

• Accepts RPM 2 coils

IPX 80 RPM Pod

• Accepts original RPM coils

The two coil families are not interchangeable simply because both cartridges fit the IPX80 device.

IPX 80 RPM 2 Pod

The RPM 2 version is the cartridge supplied with the standard SMOK IPX80 kit.

It supports:

SMOK RPM 2 Replacement Coils

Common RPM 2 options include:

• RPM 2 Mesh 0.16Ω
• RPM 2 DC 0.6Ω MTL

The standard IPX80 kit originally includes both of these coil styles.

RPM 2 Mesh 0.16Ω Coil

The popular:

RPM 2 Mesh 0.16Ω

is rated at approximately:

25–50W

with around:

40W

commonly identified as its preferred operating point.

It is designed primarily for:

• DTL vaping
• More airflow
• Higher vapor production
• Lower-resistance operation

This coil must be installed in the IPX80 RPM 2 Pod, not the original RPM pod.

RPM 2 DC 0.6Ω MTL Coil

The:

RPM 2 DC 0.6Ω MTL Coil

operates at approximately:

12–25W

and is designed for a more restricted mouth-to-lung draw.

Compared with the 0.16Ω Mesh option, it generally provides:

• Lower vapor output
• Lower power consumption
• Tighter draw
• More restricted airflow preference

Again, it requires the RPM 2 version of the IPX80 cartridge.

RPM 2 Coil Comparison

Coil	Resistance	Power Range	General Style
RPM 2 Mesh	0.16Ω	25–50W	DTL
RPM 2 DC MTL	0.6Ω	12–25W	MTL

The cartridge does not determine the exact wattage; the installed coil does.

IPX 80 Original RPM Pod

SMOK also manufactures:

IPX 80 Empty RPM Pod

This cartridge fits the same IPX80 device body but accepts the older:

Original SMOK RPM Coil Series

rather than RPM 2 coils.

This gives IPX80 owners access to a wider range of coil styles if they purchase the correct cartridge.

Popular Original RPM Coil Options

Depending on current availability, the original RPM family includes options such as:

• RPM Mesh 0.4Ω
• RPM MTL Mesh 0.3Ω
• RPM DC 0.8Ω MTL
• RPM Triple 0.6Ω
• RPM Quartz 1.2Ω
• RPM SC 1.0Ω

Always verify coil wattage and vaping style before installation.

RPM Pod vs RPM 2 Pod

Feature	IPX80 RPM Pod	IPX80 RPM 2 Pod
Capacity	5.5ml	5.5ml
Device	IPX80	IPX80
Coil Family	Original RPM	RPM 2
Refillable	Yes	Yes
Coil Replaceable	Yes	Yes
Coils Interchangeable?	No	No

The pod must match the coil family.

Important: RPM and RPM 2 Coils Are Different

Do not force an RPM 2 coil into an original RPM cartridge or an RPM coil into an RPM 2 cartridge.

The coil families have different physical dimensions.

Use:

RPM Pod → RPM Coils

and:

RPM 2 Pod → RPM 2 Coils

This is the safest way to avoid compatibility errors.

Side-Fill Refillable Design

Current replacement-pod specifications identify the IPX80 cartridge as using a:

Side-Filling System

with a silicone closure.

To refill:

1. Remove the pod from the device.
2. Locate the silicone filling stopper.
3. Open the fill port.
4. Insert the e-liquid bottle nozzle.
5. Fill carefully.
6. Avoid overfilling.
7. Close the stopper firmly.
8. Reinstall the pod.

Transparent E-Liquid Window

The cartridge uses translucent:

PCTG Construction

which allows users to monitor the approximate remaining e-liquid level.

Keeping enough liquid inside the pod helps prevent the installed coil wick from drying out.

Integrated Duck-Billed Mouthpiece

The IPX80 replacement cartridge features an integrated:

Duck-Billed Mouthpiece

The mouthpiece is part of the pod structure rather than a separate removable drip tip.

Its broad shape is designed for comfortable inhalation across both MTL and DTL configurations.

Magnetic Pod Connection

The IPX80 cartridge attaches to the device through a:

Magnetic Connection

This makes removal straightforward for:

• Refilling
• Coil replacement
• Cleaning
• Pod swapping
• E-liquid changes

The cartridge itself does not need to be threaded into the device.

Press-Fit Coil Installation

Both RPM and RPM 2 versions use:

Press-Fit Replacement Coils

To replace the coil:

1. Remove the cartridge.
2. Empty excess liquid if necessary.
3. Pull the worn coil from the base.
4. Insert the correct replacement coil.
5. Press it firmly into place.
6. Refill the cartridge.
7. Allow the wick to saturate.
8. Reinstall the pod.

Prime New Coils Before Vaping

Whenever a new coil is installed:

1. Install it securely.
2. Fill the cartridge.
3. Allow approximately 5–10 minutes for the wick to absorb e-liquid.
4. Start near the lower end of the recommended wattage range.
5. Increase power gradually if required.

Using a fresh coil before saturation can cause a burnt taste.

Adjustable Airflow Through the IPX80 Device

The replacement pod itself does not contain the external airflow ring.

Airflow adjustment is provided by the:

SMOK IPX80 Device Body

When the pod is installed, users can rotate the IPX80 airflow-control ring to adjust the draw.

This allows the same platform to support both:

• More restricted MTL
• More open DTL

depending on the pod and coil combination.

Designed Specifically for SMOK IPX80

The safest confirmed device compatibility is:

SMOK IPX80 Pod Mod Kit

SMOK’s official guidance specifically lists these cartridges under the:

IPX 80 Pod Series

Do not assume they fit Nord, RPM 2, SCAR, or other devices just because those devices may use the same coil family.

Coil-family compatibility does not automatically mean pod-shell compatibility.

IPX80 Pod vs RPM 2 Device Pod

The SMOK RPM 2 device has its own:

7ml RPM 2 Pod Series

while the IPX80 has a dedicated:

5.5ml IPX 80 Pod Series

Although both can use RPM 2 coils in the appropriate version, the physical pod cartridges are different products.

Do not order an RPM 2 device cartridge as a substitute for an IPX80 cartridge.

IPX80 Pod vs Nord 4 Pod

The Nord 4 also has separate RPM and RPM 2 pod versions.

However:

Nord 4 Pod ≠ IPX80 Pod

Both systems may accept compatible coil families, but their pod shells are designed for different device bodies.

IPX80 Pod vs SCAR-P3/P5 Pod

SMOK also made 5.5ml RPM and RPM 2 cartridges for SCAR-P3 and SCAR-P5.

Again, those cartridge shells should not automatically be treated as interchangeable with IPX80 pods.

Buy the pod specifically labeled:

IPX 80

Suitable E-Liquid for RPM 2 Mesh 0.16Ω

The 0.16Ω Mesh coil is designed for higher-output DTL vaping.

Higher-VG, lower-strength freebase e-liquid is commonly paired with this type of coil.

Always check the specific e-liquid and coil recommendations before use.

Suitable E-Liquid for RPM 2 DC 0.6Ω MTL

The 0.6Ω DC MTL option uses much lower power.

Balanced formulations such as:

50VG / 50PG

are commonly used with MTL-oriented pod coils.

Nicotine strength should be selected according to vapor output and individual tolerance.

Choose E-Liquid Based on the Coil

Because the IPX80 cartridge itself is empty, e-liquid suitability is determined mainly by the installed coil.

For example:

High-Output DTL Coil

• More vapor
• Lower nicotine generally preferred
• Higher VG commonly used

MTL Coil

• Lower vapor production
• More balanced VG/PG commonly suitable

Avoid applying one e-liquid recommendation to every coil.

Useful as a Spare Pod

A 3-pack of empty IPX80 cartridges can be useful for keeping:

• One active pod
• One spare pod
• One separate pod for another flavor

Some users may also keep separate RPM and RPM 2 versions if they want access to both coil ecosystems.

When Should the Pod Be Replaced?

The pod itself may last longer than an individual coil.

Replace the cartridge if you notice physical problems such as:

• Cracks
• Damaged mouthpiece
• Worn filling seal
• Persistent leaking from the pod body
• Loose magnetic fit
• Damaged coil opening
• Permanent deformation

A burnt taste alone may indicate that only the coil needs replacement.

When Should the Coil Be Replaced?

Common signs of coil wear include:

• Persistent burnt taste
• Reduced flavor
• Reduced vapor
• Darkened e-liquid
• Gurgling
• Unusual leakage related to coil condition

Replace the coil separately if the pod itself remains healthy.

How to Maintain the IPX80 Pod

To help maintain the cartridge:

• Do not overfill
• Close the silicone stopper securely
• Keep the cartridge away from extreme heat
• Clean condensation around the base
• Use only the correct coil family
• Do not force incompatible coils
• Replace cracked or damaged pods
• Keep enough e-liquid around the wick

SMOK IPX80 Replacement Pod Specifications

Specification	Details
Brand	SMOK
Series	IPX 80
Product Type	Empty Replacement Pod
Capacity	5.5ml
Pack Size	3PCS
Version 1	Empty RPM 2 Pod
Version 2	Empty RPM Pod
RPM 2 Pod Coils	RPM 2 Series
RPM Pod Coils	Original RPM Series
Filling System	Side Fill
Closure	Silicone Stopper
Material	PCTG
Mouthpiece	Integrated Duck-Billed
Pod Connection	Magnetic
Coil Installation	Press-Fit
Primary Compatibility	SMOK IPX80
Refillable	Yes
Integrated Coil	No
Coils Included	No
E-Liquid Included	No

Why Choose SMOK IPX80 Replacement Empty Pods?

The SMOK IPX 80 Replacement Empty Pod Cartridge 5.5ml 3PCS provides a practical replacement solution for existing IPX80 users.

Key characteristics include:

• 5.5ml e-liquid capacity
• 3 pods per pack
• RPM 2 pod option
• Original RPM pod option
• Refillable design
• Replaceable coils
• Side filling
• Silicone stopper
• Magnetic connection
• Press-fit coil installation
• Transparent PCTG reservoir
• Duck-billed mouthpiece
• Compatible with SMOK IPX80
• No e-liquid included
• No coil included

Who Is the SMOK IPX80 Replacement Pod For?

This accessory may suit adult users searching for:

• SMOK IPX80 replacement pod UAE
• SMOK IPX 80 empty pod Dubai
• IPX80 RPM 2 pod UAE
• IPX80 RPM pod Dubai
• SMOK IPX80 5.5ml cartridge
• SMOK IPX80 pod 3PCS
• IPX80 replacement cartridge UAE
• SMOK RPM 2 IPX80 pod
• SMOK IPX80 refillable pod
• IPX 80 empty cartridge Dubai

Frequently Asked Questions

How much e-liquid does the SMOK IPX80 pod hold?

The standard replacement cartridge holds 5.5ml.

How many cartridges come in a pack?

SMOK lists 3 pods per replacement pack.

Are the pods empty?

Yes. These are empty refillable replacement cartridges.

Are coils included?

No. Replacement coils are purchased separately.

Are there two different IPX80 pods?

Yes. SMOK lists an RPM 2 Pod and an RPM Pod.

Which coils fit the IPX80 RPM 2 Pod?

It accepts SMOK RPM 2 coils, including the commonly used 0.16Ω Mesh and 0.6Ω DC MTL options.

Which coils fit the IPX80 RPM Pod?

It accepts the original SMOK RPM coil family.

Are RPM and RPM 2 coils interchangeable?

No. Each coil family requires its corresponding cartridge.

Does the standard IPX80 kit use the RPM 2 pod?

Yes. SMOK’s standard IPX80 kit includes a 5.5ml IPX 80 RPM 2 Pod.

Is the cartridge refillable?

Yes.

How is the pod filled?

The common 5.5ml version uses a silicone-stoppered side-filling port.

Does the pod have adjustable airflow?

Airflow is controlled by the IPX80 device’s airflow ring when the cartridge is installed.

Does it fit the Nord 4?

No universal pod-shell compatibility should be assumed. Nord 4 has its own dedicated RPM/RPM 2 cartridges.

Does it fit the SMOK RPM 2 kit?

The RPM 2 device uses its own cartridge design. Shared coil compatibility does not mean the pod itself is interchangeable.

Should a new coil be primed?

Yes. After filling, allow approximately 5–10 minutes for the new coil wick to saturate.

Does the product contain nicotine?

No. These are empty replacement accessories.

SMOK IPX 80 Replacement Empty Pod Cartridge in Dubai, UAE

The SMOK IPX 80 Replacement Empty Pod Cartridge 5.5ml 3PCS Best in UAE provides a refillable replacement solution for the SMOK IPX80 Pod Mod Kit. Each cartridge offers 5.5ml capacity, magnetic connection, side filling, replaceable press-fit coils, translucent PCTG construction, and an integrated duck-billed mouthpiece.

Customers can choose between the IPX80 RPM 2 Pod for RPM 2 coils and the IPX80 RPM Pod for original RPM coils. Make sure the selected cartridge matches the coil family you intend to use, because original RPM and RPM 2 replacement coils are physically different and should not be interchanged.

When buying SMOK IPX80 Replacement Empty Pods online in Dubai, Abu Dhabi, Sharjah, Ajman, or across the UAE, verify the 5.5ml capacity, three-piece pack, and exact RPM/RPM 2 version before ordering.

For adults aged 18+ only. This accessory contains no e-liquid or nicotine. If used with nicotine-containing e-liquid, nicotine is an addictive substance.