Smok RPM 3 Series Replacement Coils 5pcs/pack Best In UAE

SMOK RPM 3 Series Replacement Coils 5pcs/Pack Best in UAE – 0.15Ω & 0.23Ω Mesh Coils

The SMOK RPM 3 Series Replacement Coils 5pcs/Pack in UAE are high-performance mesh replacement coils designed for compatible SMOK pod-mod systems including the RPM 5, RPM 5 Pro, Nord 5, and selected RPM 85/100 pod configurations. Available in 0.15Ω and 0.23Ω Meshed resistance options, the RPM 3 series is primarily designed for Direct-to-Lung vaping with fast heating, larger vapor production, and high-flow e-liquid delivery.

The RPM 3 Meshed 0.15Ω coil operates from 40W to 80W, while the RPM 3 Meshed 0.23Ω coil operates from 20W to 45W. Both use a press-fit installation system and are sold in official 5-piece replacement packs, making them suitable for users who want spare coils for compatible RPM 3 cartridges.

Key Features of SMOK RPM 3 Replacement Coils

• Brand: SMOK
• Series: RPM 3
• Product Type: Replacement Vape Coils
• Pack Size: 5 Coils
• Coil Technology: Meshed
• Resistance Option 1: 0.15Ω
• 0.15Ω Power Range: 40–80W
• Resistance Option 2: 0.23Ω
• 0.23Ω Power Range: 20–45W
• Vaping Style: DTL
• Installation: Press-Fit
• Primary Compatibility: RPM 5 / RPM 5 Pro / Nord 5
• Additional Compatibility: RPM 85 / RPM 100 when using the correct RPM 3 pod
• E-Liquid Included: No
• Nicotine Included: No

What Are SMOK RPM 3 Coils?

The SMOK RPM 3 coil series is a mesh-coil platform developed for higher-output SMOK pod systems.

Rather than using conventional round wire, the RPM 3 coils use a meshed heating structure with a larger surface area.

This design is intended to provide:

• Faster heating
• More even atomization
• Strong vapor production
• Consistent e-liquid vaporization
• DTL-oriented airflow

The RPM 3 platform should not be confused with the original RPM or RPM 2 coil families.

RPM 3 Meshed 0.15Ω Coil

The higher-power option is the:

SMOK RPM 3 Meshed 0.15Ω Coil

Official specifications:

• Resistance: 0.15Ω
• Power Range: 40–80W
• Heating Type: Mesh
• Installation: Press-Fit
• Vaping Style: DTL

This coil can take advantage of the full 80W maximum output of devices such as the SMOK RPM 5.

Who Should Choose the 0.15Ω RPM 3 Coil?

The 0.15Ω option is aimed at users who prefer:

• Higher wattage
• More open airflow
• Warmer vapor
• Larger vapor production
• Direct-to-Lung vaping

Because it operates at up to 80W, it also consumes battery power and e-liquid more quickly than the 0.23Ω option.

RPM 3 Meshed 0.23Ω Coil

The second option is:

SMOK RPM 3 Meshed 0.23Ω Coil

Official specifications:

• Resistance: 0.23Ω
• Power Range: 20–45W
• Heating Type: Mesh
• Installation: Press-Fit
• Vaping Style: DTL / More Restricted DTL

The 0.23Ω version operates at substantially lower wattage than the 0.15Ω coil.

Who Should Choose the 0.23Ω RPM 3 Coil?

The 0.23Ω option may suit users who prefer:

• Lower wattage
• Reduced battery consumption
• Moderate vapor production
• Cooler operation
• More restricted DTL draw

Its 20–45W range makes it easier to run at moderate power while remaining within the RPM 3 platform.

RPM 3 0.15Ω vs 0.23Ω

Choose the 0.15Ω coil for higher-power vaping or the 0.23Ω coil for a more moderate setup.

New Mesh Heating Technology

SMOK describes the RPM 3 range as using an enlarged meshed heating surface.

A wider mesh structure can help provide:

• Larger contact area with the wick
• Faster heating
• More even heating
• High vapor output

Actual performance still depends on e-liquid, wattage, airflow, and coil condition.

Designed for Direct-to-Lung Vaping

RPM 3 coils are primarily designed for:

DTL – Direct-to-Lung Vaping

This generally means:

• More airflow
• More vapor per puff
• Lower coil resistance
• Higher wattage
• Lower-strength e-liquid than tight MTL setups

These coils should not be treated as traditional high-resistance MTL coils.

Press-Fit Coil Installation

RPM 3 coils use a:

Press-Fit Installation System

There is no need to screw the coil into the pod.

To replace a coil:

1. Remove the compatible pod from the device.
2. Turn the pod over.
3. Pull out the used RPM 3 coil.
4. Push the new coil firmly into position.
5. Fill the pod with compatible e-liquid.
6. Allow the wick to saturate.
7. Reinstall the pod.
8. Begin within the recommended wattage range.

Prime a New RPM 3 Coil

Before vaping a fresh coil:

1. Install the coil correctly.
2. Fill the cartridge.
3. Allow approximately 5–10 minutes for the wick to saturate.
4. Start near the lower end of the recommended wattage range.
5. Increase power gradually if desired.

Avoid firing the coil while its cotton is dry.

Compatible With SMOK RPM 5

The RPM 3 coil family was originally designed around the:

SMOK RPM 5

The RPM 5 uses the dedicated RPM 5 pod and supports:

• RPM 3 0.15Ω
• RPM 3 0.23Ω

Its maximum 80W output can fully support the 0.15Ω coil’s official 40–80W range.

Compatible With SMOK RPM 5 Pro

The:

SMOK RPM 5 Pro

uses the same RPM 5 pod and RPM 3 coil family.

The standard RPM 5 Pro kit was originally supplied with:

• 0.15Ω RPM 3 Meshed coil
• 0.23Ω RPM 3 Meshed coil

Compatible With SMOK Nord 5

SMOK officially lists the:

Nord 5 Pod Kit

as compatible with RPM 3 replacement coils.

This is important because older Nord generations use different coil families.

Do not assume RPM 3 coils work in every SMOK Nord device.

Nord 5 Compatibility

For the Nord 5, confirm that the device is using the correct pod designed for RPM 3 coils.

The Nord 5 was developed around the same:

• 0.15Ω RPM 3
• 0.23Ω RPM 3

mesh-coil family.

Compatible With RPM 85 and RPM 100

SMOK’s own regulatory/compliance documentation identifies:

RPM 85/100 Empty Pod (RPM 3 Coil)

in both 2ml and 6ml configurations.

This confirms that RPM 3 coils can also be used with compatible:

• SMOK RPM 85
• SMOK RPM 100

hardware when the correct RPM 3 pod cartridge is installed.

Important Pod Compatibility Note

Coil-family compatibility does not mean every SMOK pod fits every device.

For example, when using RPM 3 coils with RPM 85 or RPM 100 hardware, make sure the cartridge is specifically designed for:

RPM 3 Coils

Do not force the coil into an incompatible pod.

RPM 3 vs Original RPM Coils

These are separate coil families.

Original RPM Series includes options such as:

• RPM Mesh 0.4Ω
• RPM Triple 0.6Ω
• RPM Quartz 1.2Ω
• RPM SC 1.0Ω
• RPM MTL Mesh 0.3Ω

RPM 3 Series includes:

• RPM 3 Meshed 0.15Ω
• RPM 3 Meshed 0.23Ω

They should not be treated as interchangeable.

RPM 3 vs RPM 2 Coils

RPM 2 is also a separate platform.

RPM 2 Series includes coils such as:

• RPM 2 Mesh 0.16Ω
• RPM 2 DC 0.25Ω
• RPM 2 DC 0.6Ω MTL

RPM 3 Series

• 0.15Ω Mesh
• 0.23Ω Mesh

Always identify the exact pod before ordering replacement coils.

RPM vs RPM 2 vs RPM 3

The similar names do not mean the coils are universally interchangeable.

Suitable E-Liquid for RPM 3 Coils

Because RPM 3 coils are designed for higher-output DTL vaping, they are generally best matched with e-liquids suitable for sub-ohm mesh coils.

A formulation around:

70VG / 30PG

is commonly used with this style of coil.

Exact suitability depends on the particular e-liquid and device.

Lower Nicotine Is Generally Better for DTL

RPM 3 coils generate significantly more vapor per puff than small high-resistance MTL cartridges.

For this reason, lower-strength freebase e-liquid is generally more appropriate than very high-strength nicotine salt liquids.

Nicotine concentration should always be selected according to:

• Coil resistance
• Vapor output
• Puff style
• Individual tolerance

Can You Use 50mg SaltNic With RPM 3 Coils?

High-strength 50mg / 5% SaltNic should not be recommended as a general pairing for RPM 3 coils.

Both RPM 3 resistances are designed for relatively high-output DTL vaping, where considerably more vapor is inhaled per puff.

Use an e-liquid strength appropriate for high-output sub-ohm hardware.

Recommended Wattage Matters

Always remain within SMOK’s stated power ranges:

RPM 3 0.15Ω

• 40W–80W

RPM 3 0.23Ω

• 20W–45W

Exceeding the recommended range can contribute to:

• Burnt cotton
• Shorter coil life
• Excessive heat

Operating too far below the recommended range may produce:

• Weak vapor
• Poor atomization
• Gurgling

Start at the Lower End

With a fresh coil, it is sensible to begin near the lower end of its range.

For example:

0.15Ω

• Start near 40W
• Increase gradually according to preference

0.23Ω

• Start near 20W
• Increase gradually

Allow the coil to break in before immediately pushing it to maximum power.

How Long Do RPM 3 Coils Last?

There is no guaranteed lifespan.

Coil life depends on:

• E-liquid sweetness
• VG/PG ratio
• Wattage
• Puff duration
• Frequency of use
• Proper priming
• Airflow
• Keeping sufficient e-liquid inside the pod

Sweetened liquids may produce coil residue more quickly.

Signs an RPM 3 Coil Needs Replacement

Replace the coil when persistent symptoms include:

• Burnt taste
• Significant flavor reduction
• Lower vapor output
• Darkened e-liquid
• Persistent gurgling
• Unusual leakage
• Inconsistent heating

A permanently burnt wick normally cannot be restored by refilling the pod.

Help Extend RPM 3 Coil Life

To support consistent performance:

• Prime new coils properly
• Keep the pod filled above the wick openings
• Stay within the recommended wattage
• Avoid repeated dry hits
• Avoid excessive chain vaping
• Use suitable e-liquid
• Keep airflow appropriate for the selected power
• Clean pod contacts during coil changes

5 Coils Per Pack

SMOK’s official package specification confirms:

5 × RPM 3 Meshed Coils Per Pack

The selected retail package normally contains five coils of one resistance.

For example:

• 5 × RPM 3 Meshed 0.15Ω

or

• 5 × RPM 3 Meshed 0.23Ω

It is not normally a mixed-resistance pack.

Pack-Size Specification Note

Some current UAE retailer pages contain contradictory text showing “3pcs/pack” in one specification area while the same page title and package contents say 5pcs.

SMOK’s official store and official coil compatibility guide both clearly state:

5pcs/pack

Therefore, 5 coils per pack is the specification that should be used for this listing.

Why Choose SMOK RPM 3 Replacement Coils?

The SMOK RPM 3 Series Replacement Coils provide two mesh resistance choices for compatible higher-output SMOK devices.

Key characteristics include:

• 5 coils per pack
• 0.15Ω Mesh option
• 40–80W range
• 0.23Ω Mesh option
• 20–45W range
• DTL-oriented performance
• Enlarged mesh heating surface
• Press-fit installation
• RPM 5 compatibility
• RPM 5 Pro compatibility
• Nord 5 compatibility
• RPM 85/100 compatibility with correct RPM 3 pod

SMOK RPM 3 Coil Specifications

Who Are SMOK RPM 3 Replacement Coils For?

These coils may suit adult users searching for:

• SMOK RPM 3 coils UAE
• RPM 3 replacement coils Dubai
• SMOK RPM 3 0.15Ω coil
• SMOK RPM 3 0.23Ω coil
• RPM 3 coils 5pcs UAE
• SMOK RPM 5 replacement coils
• RPM 5 Pro coils UAE
• SMOK Nord 5 replacement coils
• RPM 85 coil UAE
• RPM 100 replacement coils Dubai

Frequently Asked Questions

How many SMOK RPM 3 coils come in a pack?

SMOK’s official package specification confirms 5 coils per pack.

Which RPM 3 coil resistances are available?

The series includes 0.15Ω Meshed and 0.23Ω Meshed coils.

What wattage is the RPM 3 0.15Ω coil?

The official operating range is 40–80W.

What wattage is the RPM 3 0.23Ω coil?

The official operating range is 20–45W.

Which coil produces more vapor?

The 0.15Ω coil generally produces more vapor because it operates at higher wattage.

Which RPM 3 coil uses less battery?

The 0.23Ω 20–45W version generally consumes less battery power than the 0.15Ω 40–80W coil.

Do RPM 3 coils fit SMOK RPM 5?

Yes. The RPM 3 platform was designed for the RPM 5 cartridge.

Do they fit RPM 5 Pro?

Yes.

Do RPM 3 coils fit SMOK Nord 5?

Yes. SMOK officially lists Nord 5 compatibility.

Do RPM 3 coils fit RPM 85 and RPM 100?

SMOK’s official compliance documentation confirms RPM 85/100 pod variants designed specifically for RPM 3 coils.

Do RPM 3 coils fit the original RPM pod?

No. Original RPM and RPM 3 are separate coil systems.

Are RPM 2 and RPM 3 coils interchangeable?

No. They are separate platforms.

Are RPM 3 coils designed for MTL?

The official resistance and power specifications make RPM 3 primarily a DTL-oriented mesh platform.

Should I prime a new RPM 3 coil?

Yes. After filling the pod, allow approximately 5–10 minutes for the wick to absorb e-liquid before normal use.

Can I use high-VG e-liquid?

A sub-ohm-friendly formulation such as 70VG/30PG is commonly suitable for this type of high-output mesh coil, subject to the e-liquid manufacturer’s recommendations.

Does the pack include e-liquid?

No. It contains replacement coils only.

SMOK RPM 3 Series Replacement Coils in Dubai, UAE

The SMOK RPM 3 Series Replacement Coils 5pcs/Pack Best in UAE provide two high-performance mesh options for compatible SMOK pod-mod systems. Choose the 0.15Ω Meshed coil at 40–80W for higher-output DTL vaping or the 0.23Ω Meshed coil at 20–45W for a more moderate power range.

When buying SMOK RPM 3 Replacement Coils online in Dubai, Abu Dhabi, Sharjah, Ajman, or across the UAE, confirm that your pod specifically supports the RPM 3 coil platform. These coils are officially compatible with SMOK RPM 5, RPM 5 Pro and Nord 5, while RPM 85/100 devices can use them with the correct RPM 3 cartridge.

Most importantly, do not confuse RPM 3 coils with original RPM or RPM 2 replacement coils, as these coil families use different compatible cartridges.

For adults aged 18+ only. This accessory contains no e-liquid or nicotine. If used with nicotine-containing e-liquid, nicotine is an addictive substance.