SMOK IPX 80 RPM2 Empty Pods 3pcs / Pack Best In UAE

SMOK IPX 80 RPM2 Empty Pods 3PCS/Pack Best in UAE – 5.5ml Replacement Pod

The SMOK IPX 80 RPM2 Empty Pods 3PCS/Pack in UAE are refillable replacement cartridges designed specifically for the SMOK IPX80 Pod Mod Kit when using the RPM2 coil platform. Each standard pod provides a generous 5.5ml e-liquid capacity, side-filling system, integrated mouthpiece, transparent e-liquid window, magnetic connection, and a press-fit opening for separately purchased SMOK RPM2 coils.

Unlike cartridges with a permanently integrated heating element, the IPX80 RPM2 pod is an empty replaceable-coil cartridge. This means users can keep the pod and replace only the RPM2 coil when it reaches the end of its usable life. The standard manufacturer package contains 3 empty IPX 80 RPM2 pods, with coils and e-liquid sold separately.

Key Features of SMOK IPX 80 RPM2 Empty Pods

• Brand: SMOK
• Product: IPX 80 Empty RPM 2 Pod
• Product Type: Empty Refillable Replacement Cartridge
• Standard Capacity: 5.5ml
• Regional / TPD Capacity: 2ml
• Pack Size: 3 Pods
• Compatible Device: SMOK IPX80 Pod Mod Kit
• Compatible Coil Platform: SMOK RPM2
• Filling System: Side Fill
• Fill Seal: Silicone Stopper
• Coil Installation: Press-Fit
• Integrated Coil: No
• Coils Included: No
• Pod Connection: Magnetic
• Mouthpiece: Integrated
• Pod Material: PCTG
• E-Liquid Window: Transparent
• Refillable: Yes
• Replaceable Coil: Yes
• E-Liquid Included: No
• Nicotine Included: No

What Is the SMOK IPX 80 RPM2 Empty Pod?

The SMOK IPX 80 RPM2 Pod is the refillable cartridge used with the SMOK IPX80 when the user wants to install an RPM2-series replacement coil.

The cartridge holds the e-liquid, while the heating coil installs separately into the bottom of the pod.

This means the system consists of:

IPX80 Device + IPX80 RPM2 Pod + RPM2 Coil

The pod itself does not contain an integrated coil.

When flavor performance drops because the coil is worn, users can normally replace the coil without throwing away a healthy cartridge.

5.5ml Standard E-Liquid Capacity

SMOK’s official product guidance lists the:

IPX 80 Pod Series – 5.5ml

and identifies the IPX 80 Empty RPM2 Pod as part of that range.

The larger 5.5ml capacity reduces how often users need to refill compared with small 2ml cartridges, particularly when using lower-resistance RPM2 coils that consume more e-liquid.

2ml Regional / TPD Version

SMOK has also officially registered a:

2ml IPX 80 RPM2 Pod

for regulated markets.

This explains why some online retailers list the IPX80 replacement cartridge as 2ml rather than 5.5ml.

For a UAE product page, the standard 5.5ml version is the stronger general specification unless your physical stock specifically contains the 2ml cartridge.

Regional Specification Note

Both capacities are legitimate SMOK configurations:

Standard Version: 5.5ml

TPD / Regional Version: 2ml

Check the physical package before finalizing inventory-specific capacity.

If your current UAE stock says 5.5ml, use 5.5ml in the product variation and specifications. If the box says 2ml, that regional specification should take priority.

Side-Fill System

The IPX 80 RPM2 cartridge uses a:

Silicone-Sealed Side Filling Port

To refill the pod:

1. Remove the cartridge from the IPX80.
2. Locate the silicone filling stopper.
3. Open the seal carefully.
4. Insert the e-liquid bottle nozzle.
5. Fill the pod without overfilling.
6. Close the silicone stopper securely.
7. Reinstall the cartridge.

The side-fill structure allows the pod to be refilled without removing the installed coil.

Transparent E-Liquid Window

The cartridge uses a translucent PCTG body that allows users to monitor the remaining liquid.

Checking the e-liquid level is important because operating an RPM2 coil without enough liquid around the cotton can cause:

• Dry hits
• Burnt flavor
• Wick damage
• Reduced coil lifespan

Integrated Mouthpiece

The IPX80 RPM2 pod uses an integrated mouthpiece.

The mouthpiece is part of the cartridge itself and does not need to be installed separately.

Its wider shape is designed to work across the IPX80’s range from more restricted vaping to open DTL use.

Magnetic Pod Connection

The cartridge attaches to the IPX80 device through a:

Magnetic Connection

This makes the pod easy to remove for:

• Refilling
• Coil replacement
• Cleaning
• E-liquid inspection

No threading is required between the pod and device.

Replaceable RPM2 Coil System

The IPX80 RPM2 pod is specifically designed for:

SMOK RPM2 Replacement Coils

The coil installs through the base of the cartridge using a push-fit connection.

This is different from integrated-coil pod systems where the entire cartridge must be discarded when the heating element wears out.

RPM 2 Mesh 0.16Ω Coil

One of the main coils designed for the IPX80 RPM2 pod is:

RPM 2 Mesh 0.16Ω

Official operating specification:

25W–50W

with approximately:

40W Best

This coil is primarily designed for:

• DTL vaping
• Higher vapor production
• More open airflow
• Lower-strength e-liquid

The original IPX80 kit includes this coil.

RPM 2 DC 0.6Ω MTL Coil

The second original IPX80 coil option is:

RPM 2 DC 0.6Ω MTL

Official power range:

12W–25W

This higher-resistance dual-coil option is designed for:

• MTL vaping
• More restricted airflow
• Lower vapor output
• Lower power consumption

It is also supplied with the original IPX80 kit.

RPM2 0.16Ω vs 0.6Ω

Feature	RPM2 Mesh 0.16Ω	RPM2 DC 0.6Ω
Power	25–50W	12–25W
Style	DTL	MTL
Airflow	More Open	More Restricted
Vapor Output	Higher	Lower
Power Consumption	Higher	Lower
Typical Liquid Style	Higher-VG / Lower Nicotine	Balanced Pod Liquid

The correct coil depends on the vaping style and e-liquid being used.

Additional RPM2 Coil Options

SMOK’s RPM2 family has expanded beyond the two original IPX80 coils.

Current RPM2-family options can include:

• RPM2 Mesh 0.16Ω
• RPM2 Mesh 0.23Ω
• RPM2 Mesh 0.3Ω
• RPM2 DC 0.25Ω
• RPM2 DC 0.6Ω MTL

However, compatibility should always be checked against both the pod and IPX80’s 1–80W output range before use.

Important: RPM2 Pod Is Not the Standard RPM Pod

SMOK produced two different IPX80 replacement cartridges:

IPX 80 RPM2 Pod

• Uses RPM2 coils

IPX 80 RPM Pod

• Uses original RPM coils

The pod shells may look similar, but the coil openings are designed for different coil families.

If you purchase the RPM2 version, use RPM2 coils.

Original RPM Coils Do Not Fit This RPM2 Pod

The IPX80 RPM2 cartridge should not be paired with classic RPM coils such as:

• RPM Mesh 0.4Ω
• RPM Triple 0.6Ω
• RPM DC 0.8Ω
• RPM Quartz 1.2Ω

Those require the separate:

IPX 80 RPM Pod

This distinction is important when ordering replacement coils.

RPM2 Is Different From RPM3

SMOK also makes an:

RPM3 Coil Platform

RPM3 coils are not the same as RPM2 coils.

Do not assume compatibility based only on the “RPM” name.

For this IPX80 RPM2 cartridge, choose coils specifically marked:

RPM 2

Designed Specifically for SMOK IPX80

This replacement pod is designed for:

SMOK IPX80 Pod Mod Kit

The IPX80 device features:

• 3000mAh built-in battery
• 1–80W adjustable output
• IPX67 protection
• Adjustable airflow
• 0.96-inch display
• Type-C charging

The RPM2 pod integrates with this device platform.

Important: Does It Fit the SMOK RPM 2 Device?

No.

Even though the SMOK RPM 2 device also uses RPM2 coils, its replacement cartridge has a different pod shell.

Therefore:

IPX80 RPM2 Pod → SMOK IPX80

RPM 2 Device Pod → SMOK RPM 2 / RPM 2S

Sharing the same coil family does not mean the pod cartridges are interchangeable.

Does It Fit SMOK Nord 4?

No.

The Nord 4 has its own:

Nord 4 RPM2 Pod

which accepts RPM2 coils but uses a different cartridge shell.

Do not install an IPX80 RPM2 pod into a Nord 4.

Does It Fit SMOK Nord X?

No.

The Nord X uses a dedicated:

Nord X RPM2 Pod

Again, the coil family may be the same, but the physical pod is different.

RPM2 Coil Compatibility vs Pod Compatibility

This is one of the most important points for customers.

Many SMOK products accept RPM2 coils, including compatible versions of:

• IPX80
• Nord 4
• Nord X
• RPM 2
• RPM 2S
• SCAR-P3
• SCAR-P5
• Thallo
• Thallo S

However, these devices often use device-specific pod shells.

An RPM2 coil may fit several cartridges, while an IPX80 RPM2 cartridge itself only fits the IPX80 device.

Works With IPX80 Adjustable Airflow

The airflow control belongs to the IPX80 device rather than being a separate slider built into the replacement pod.

Once the RPM2 pod is installed, the IPX80 airflow controls can be adjusted to suit:

• DTL
• Restricted draw
• MTL

depending on the coil installed.

The 0.16Ω Mesh coil is normally paired with more open airflow, while the 0.6Ω DC coil is suitable for a tighter draw.

Suitable E-Liquid for RPM2 Mesh 0.16Ω

The 0.16Ω Mesh coil is designed for higher-output DTL vaping.

Compatible higher-VG freebase e-liquid is commonly used, for example:

60VG–70VG

depending on the liquid and user preference.

Because vapor production is relatively high at 25–50W, high-strength nicotine should not be automatically recommended.

Suitable E-Liquid for RPM2 DC 0.6Ω

The 0.6Ω MTL coil operates at a lower:

12–25W

range.

Balanced formulations such as:

50VG / 50PG

are commonly suitable for this style of coil.

Nicotine strength should always be selected according to individual tolerance, vapor output, and product guidance.

How to Install an RPM2 Coil

To prepare an empty IPX80 RPM2 pod:

1. Remove one empty cartridge from the package.
2. Select a compatible RPM2 coil.
3. Push the coil firmly into the opening beneath the pod.
4. Open the side-fill seal.
5. Fill with suitable e-liquid.
6. Close the fill port.
7. Allow the coil to saturate.
8. Install the pod onto the IPX80.

The coil uses a press-fit rather than threaded installation.

Prime a New RPM2 Coil

When using a new coil, allow approximately:

5–10 minutes

after filling before normal vaping.

This gives the internal cotton time to absorb the e-liquid.

For the 0.16Ω Mesh coil, begin toward the lower end of the recommended wattage range and increase gradually if desired.

How Long Does an IPX80 Pod Last?

The cartridge itself does not have a fixed lifespan.

A healthy pod may continue to be used across several coil replacements.

Pod lifespan depends on:

• Filling-port condition
• PCTG condition
• Coil opening
• Magnetic connection
• Mouthpiece condition
• Cleaning and handling

When Should the Pod Be Replaced?

Replace the cartridge if you notice:

• Cracked PCTG
• Damaged mouthpiece
• Loose or damaged fill stopper
• Persistent leakage from the cartridge itself
• Damaged coil opening
• Deformed pod body
• Poor magnetic seating

A burnt taste alone usually indicates that the coil needs replacing rather than the pod.

How to Maintain the Pod

To support longer cartridge life:

• Do not overfill
• Close the silicone seal securely
• Keep the magnetic base clean
• Remove condensation when necessary
• Keep the pod away from excessive heat
• Avoid dropping it
• Use only compatible RPM2 coils

3 Empty Pods Per Pack

SMOK’s official product guidance confirms:

3PCS/Pack

for the IPX 80 Empty RPM2 Pod.

The package contains replacement cartridges only.

Coils are purchased separately unless a particular retailer explicitly bundles them.

What’s Included?

The standard replacement package contains:

3 × SMOK IPX 80 Empty RPM2 Pods

It does not normally include:

• RPM2 coils
• E-liquid
• IPX80 device
• Charging cable

SMOK IPX 80 RPM2 Empty Pod Specifications

Specification	Details
Brand	SMOK
Product	IPX 80 Empty RPM2 Pod
Type	Empty Refillable Replacement Pod
Standard Capacity	5.5ml
Regional / TPD Capacity	2ml
Pack Size	3PCS
Device Compatibility	SMOK IPX80
Coil Compatibility	SMOK RPM2 Series
Filling	Side Fill
Fill Seal	Silicone Stopper
Coil Installation	Press-Fit
Material	PCTG
Connection	Magnetic
Mouthpiece	Integrated
Transparent Reservoir	Yes
Refillable	Yes
Coils Included	No
E-Liquid Included	No
Nicotine Included	No

Why Choose SMOK IPX 80 RPM2 Empty Pods?

The SMOK IPX 80 RPM2 Empty Replacement Pods provide an easy way to maintain an existing IPX80 without replacing the entire vaping device.

Key characteristics include:

• Standard 5.5ml capacity
• Official 2ml regional version available
• 3 pods per manufacturer pack
• Refillable design
• Side filling
• Transparent e-liquid window
• Magnetic installation
• Press-fit RPM2 coil system
• Replaceable coil design
• DTL and MTL coil choices
• Dedicated IPX80 compatibility
• No integrated coil

Who Are SMOK IPX 80 RPM2 Pods For?

These pods may suit adult users searching for:

• SMOK IPX 80 RPM2 Empty Pods UAE
• SMOK IPX80 replacement pod Dubai
• IPX80 RPM2 pod 5.5ml
• SMOK IPX80 pods 3PCS
• RPM2 replacement cartridge UAE
• SMOK IPX80 RPM2 pod Dubai
• IPX80 0.16Ω coil pod
• IPX80 0.6Ω MTL pod
• SMOK RPM2 empty pod UAE
• IPX80 replacement cartridge Dubai

Frequently Asked Questions

How many pods come in the pack?

SMOK officially lists 3 empty IPX80 RPM2 pods per pack.

What is the capacity?

The standard version is 5.5ml. SMOK also produced a 2ml regional/TPD version.

Is the pod refillable?

Yes. It uses a side-filling system.

Are coils included?

No. The standard replacement-pod package contains empty cartridges.

Which coils fit the IPX80 RPM2 pod?

It is designed for SMOK RPM2 coils.

Does the RPM2 Mesh 0.16Ω coil fit?

Yes. The original IPX80 kit includes this coil. Its official range is 25–50W, with approximately 40W identified as the best setting.

Does the RPM2 DC 0.6Ω MTL coil fit?

Yes. Its official operating range is 12–25W.

Can I use original RPM coils?

No. Original RPM coils require the separate IPX80 RPM pod.

Does this pod fit the SMOK IPX80?

Yes. It is specifically designed for the IPX80.

Does it fit the SMOK RPM 2 device?

No. The RPM 2 device uses a different cartridge shell despite sharing RPM2 coil compatibility.

Does it fit Nord 4?

No. Nord 4 requires its own Nord 4 RPM2 pod.

Does it fit Nord X?

No. Nord X uses its own RPM2-compatible pod shell.

Is the coil replaceable separately?

Yes. The cartridge uses separate press-fit RPM2 coils.

Does the pod control airflow?

The installed cartridge works with the IPX80 device’s adjustable airflow system.

Does the pod contain nicotine?

No. It is an empty hardware accessory.

SMOK IPX 80 RPM2 Empty Pods 3PCS in Dubai, UAE

The SMOK IPX 80 RPM2 Empty Pods 3PCS/Pack Best in UAE are dedicated replacement cartridges for the SMOK IPX80 Pod Mod Kit, offering a standard 5.5ml refillable capacity, side filling, magnetic connection, transparent PCTG body, integrated mouthpiece, and compatibility with SMOK RPM2 replacement coils.

The replaceable-coil design lets users choose between options such as the RPM2 Mesh 0.16Ω 25–50W DTL coil and RPM2 DC 0.6Ω 12–25W MTL coil, while replacing the coil independently from the cartridge.

When buying SMOK IPX80 RPM2 Empty Pods online in Dubai, Abu Dhabi, Sharjah, Ajman, or across the UAE, make sure you select the IPX80 RPM2 version, not the separate IPX80 original RPM pod or the RPM2-compatible cartridge designed for another SMOK device. Also check whether your inventory is the standard 5.5ml version or the official 2ml regional variant.

For adults aged 18+ only. This accessory contains no e-liquid or nicotine. If used with nicotine-containing e-liquid, nicotine is an addictive substance.