Vaporesso QF Strip Replacement Coils 0.15ohm is one crazy beast, with a new innovative Quad flow air distribution system and massive 8ml/5ml capacity. Designed to not spit back and not leak. The SKRR endeavours to bring you fantastic flavour with monster cloud production!
You will find alongside the base of the SKRR are the quad adjustable airflow slots that you are able to fully open or close. This system draws air directly into the coil head. To further assist with airflow the coils.
The QF Strip, as the name suggests, has a distinct strip design for even heating and a longer lasting life. Expect massive clouds with them. The 3 varieties of QF Coils are said to have industry leading technology that sets them apart from other coils out there.
Vaporesso QF Strip Replacement Coils 0.15ohm:
Priming your new coil is the first task for any new coil/vaporiser and this is no exception. Priming helps to protect your coil and yourself from dry hits or a burnt horrible taste. Unscrew the tank for the mod (510 threaded) and unscrew the base of the tank from the glass to expose the coil within (use a paper towel if difficult to unscrew). You now need to saturate the cotton within the coil with a little e juice.
Reassemble your tank and screw back onto your mod (at this point it is good practice to check all sealing O rings to ensure no leakage!). You may now also fill the tank to ensure complete saturation.
TIP: Don’t forget the SKRR Tank has a new locking system. You must first twist the drip tip (2 full turns) then rotate the top cap to reveal the filling ports.
Place your device to the side for a short while to allow all the e -juice to make its way through. Now time for the primer puffs – without touching the firing button take a few sharp short pulls from the tank. You may see air bubbles rising to the top of the tank. Your new coil is now ready for use
Contains: x3 QF Strip 0.15Ω Coils
Compatible: Vaporesso SKRR Tank
Shchetynina –
The prudect is very good.