Uwell Caliburn G and KoKo Prime Coils 1.ohm Best In UAE

Uwell Caliburn G and KOKO Prime Coils 1.0ohm Best In UAE

The Uwell Caliburn G and KOKO Prime Coils 1.0Ω are replaceable FeCrAl coils designed for a tighter Mouth-to-Lung (MTL) vaping experience with compatible Uwell Caliburn G-series pods. Operating at approximately 10–15W, the 1.0Ω coil provides moderate vapor production, controlled airflow, and a cooler, more restricted draw than the lower-resistance 0.8Ω mesh option.

Supplied in a convenient 4-piece pack, these press-fit replacement coils are directly compatible with the Uwell Caliburn G and Caliburn KOKO Prime, including the KOKO Prime Vision. Uwell specifically selected the 1.0Ω coil as the pre-installed option for the KOKO Prime because of its tighter airflow and layered flavor delivery.

Key Features of Uwell Caliburn G 1.0Ω Coils

• Brand: Uwell
• Series: Caliburn G
• Product Type: Replacement Vape Coil
• Resistance: 1.0Ω
• Coil Material: FeCrAl
• Coil Style: Standard 1.0Ω MTL Coil
• Recommended Wattage: Approx. 10–15W
• Vaping Style: MTL / Mouth-to-Lung
• Airflow: Tighter / Restricted
• Installation: Press-Fit / Plug-and-Play
• Pack Size: 4 Coils
• Caliburn G Compatible: Yes
• KOKO Prime Compatible: Yes
• KOKO Prime Vision Compatible: Yes
• Refillable Pod Required: Yes
• E-Liquid Included: No
• Nicotine Included: No

What Is the Uwell Caliburn G 1.0Ω Coil?

The Uwell Caliburn G 1.0Ω Coil is a replaceable heating element designed for compatible refillable Caliburn G pods.

Unlike disposable integrated-coil cartridges, the Caliburn G platform allows the coil to be removed separately from the pod.

When the coil becomes worn, users can replace only the heating element rather than automatically replacing the entire cartridge.

The 1.0Ω version is designed primarily for:

• Mouth-to-Lung vaping
• Lower-wattage operation
• More restricted airflow
• Moderate vapor production
• Pod-friendly e-liquid

FeCrAl 1.0Ω Coil

Uwell officially specifies this replacement as a:

FeCrAl 1.0Ω Caliburn G Coil

FeCrAl is the heating-wire material used inside the coil.

It is important to distinguish this version from Uwell’s:

UN2 Meshed-H 0.8Ω Coil

The 1.0Ω option is the standard higher-resistance MTL coil, while the 0.8Ω version uses Uwell’s Meshed-H construction for a looser, higher-output experience.

Is the 1.0Ω Caliburn G Coil Mesh?

No.

The original 1.0Ω Caliburn G coil is a standard FeCrAl MTL coil, not the UN2 Meshed-H version.

Uwell’s official KOKO Prime specifications distinguish between:

• FeCrAl 1.0Ω Caliburn G Coil
• FeCrAl UN2 Meshed-H 0.8Ω Caliburn G Coil

This distinction matters when selecting replacements.

Recommended 10–15W Range

Current Caliburn G replacement-coil specifications commonly rate the 1.0Ω coil for:

10–15W

This lower-power range suits the coil’s tighter MTL design.

The exact device may control output automatically rather than allowing manual wattage adjustment.

For example, the KOKO Prime has a maximum output of:

15W

which aligns naturally with the 1.0Ω coil.

Designed for Mouth-to-Lung Vaping

The 1.0Ω coil is primarily an:

MTL / Mouth-to-Lung Coil

MTL vaping generally involves drawing vapor into the mouth before inhaling.

Typical characteristics include:

• Tighter airflow
• Lower wattage
• Smaller vapor volume
• Cooler output
• Higher-resistance coils

This makes the 1.0Ω Caliburn G coil noticeably different from lower-resistance DTL-focused coils.

Tighter Airflow

Uwell specifically describes the 1.0Ω coil as suitable for:

Tighter Airflow

This makes it a strong match for users who prefer a more restricted draw rather than an airy pod experience.

On compatible devices with reversible pod airflow, the pod position can further change draw restriction.

Rich, Layered Flavor

According to Uwell’s official KOKO Prime information, the 1.0Ω coil is intended to provide:

Rich-Layered Flavor

Because the coil operates at lower wattage and produces less vapor than the 0.8Ω mesh version, flavor delivery is more concentrated within a tighter MTL draw.

Actual flavor performance depends on:

• E-liquid
• Coil condition
• Proper priming
• Airflow
• Puff duration

Compatible With Uwell Caliburn G

The original Uwell Caliburn G supports the 1.0Ω replacement coil.

The Caliburn G uses a:

• 2ml refillable pod
• Replaceable coil design
• Top-fill system
• Reversible airflow
• Maximum 18W output

The 1.0Ω coil provides the more restricted MTL option for this platform.

Compatible With Uwell KOKO Prime

The Caliburn KOKO Prime is one of the main devices associated with this coil.

In fact, Uwell officially supplies the:

1.0Ω Caliburn G Coil pre-installed in the KOKO Prime

The KOKO Prime uses:

• 690mAh battery
• Maximum 15W output
• 2ml refillable pod
• Type-C charging
• Draw activation

The 1.0Ω coil is therefore a direct replacement for its original coil.

Compatible With KOKO Prime Vision

The Uwell KOKO Prime Vision also officially supports the 1.0Ω Caliburn G coil.

Its official specification lists:

FeCrAl 1.0Ω Caliburn G Coil – Pre-Installed

alongside the 0.8Ω Meshed-H option.

Additional Caliburn G-Series Compatibility

The Caliburn G coil family is also used across selected newer Uwell devices.

Depending on the exact pod and device generation, the 1.0Ω coil can be compatible with models such as:

• Caliburn G
• Caliburn KOKO Prime
• KOKO Prime Vision
• Selected Caliburn G2 setups
• Caliburn GK2
• Caliburn X
• Caliburn TENET
• TENET KOKO
• Selected other G-coil-compatible devices

Because Uwell has introduced several later cartridge systems, always check the exact device and pod before ordering.

1.0Ω vs 0.8Ω Caliburn G Coil

The two original Caliburn G coil options provide different vaping experiences.

Choose the 1.0Ω if you prefer a tighter MTL experience.

1.0Ω vs 1.2Ω G2 Coil

Uwell later introduced a:

1.2Ω UN2 Meshed-H Caliburn G2 Coil

This is a separate coil option.

Do not identify the 1.0Ω version as the 1.2Ω G2 coil.

Suitable E-Liquid for the 1.0Ω Coil

The 1.0Ω Caliburn G coil is best matched with relatively thin pod-friendly e-liquids.

A common choice is:

50VG / 50PG

or other formulas with approximately 50% PG or more, where compatible with the device.

Balanced e-liquid can wick efficiently through the small MTL coil.

Very thick 70VG or 80VG formulas may wick more slowly.

Can You Use SaltNic?

Yes.

The 1.0Ω coil is commonly used with compatible nicotine-salt e-liquids because of its:

• Higher resistance
• Lower wattage
• Tighter airflow
• Moderate vapor output

Nicotine strength should still be selected according to the e-liquid manufacturer’s guidance and individual preference.

Can You Use Freebase E-Liquid?

Yes.

Compatible lower-strength freebase e-liquids can also be used.

Balanced 50/50 freebase formulas are generally more suitable for the 1.0Ω Caliburn G coil than extremely thick high-VG liquids.

Press-Fit Coil Installation

The Caliburn G coil uses a:

Press-Fit / Plug-and-Play Installation

There is no threaded connection.

To replace the coil:

1. Remove the pod from the device.
2. Turn the pod over.
3. Pull the old coil from the bottom.
4. Align the locating section of the new 1.0Ω coil.
5. Push it firmly into place.
6. Refill the pod if necessary.
7. Allow the new coil to saturate.
8. Reinsert the pod into the device.

Coil Alignment Matters

Uwell specifically advises users to align the coil with the locating slot in the pod during installation.

Incorrect positioning can prevent the coil from seating correctly.

Before filling, make sure the coil is pushed fully into place.

How to Prime a New 1.0Ω Coil

Proper priming can help prevent burnt taste.

For a fresh coil:

1. Add a small amount of compatible e-liquid to visible cotton openings where practical.
2. Install the coil securely.
3. Fill the pod.
4. Leave the pod for approximately 5–10 minutes.
5. Begin with gentle draws.

This allows the wick to become saturated before normal use.

When Should You Replace a Caliburn G Coil?

Replacement time varies depending on usage.

Common signs include:

• Burnt taste
• Reduced flavor
• Reduced vapor
• Persistent gurgling
• Unusual leaking
• Darkened e-liquid
• Inconsistent performance

There is no guaranteed number of days for every coil.

What Affects Coil Lifespan?

Coil life can depend on:

• E-liquid sweetness
• VG/PG ratio
• Frequency of use
• Puff length
• Proper priming
• Keeping enough liquid in the pod
• Storage conditions

Highly sweetened e-liquid may leave residue on the coil more quickly.

Four Coils Per Pack

The UAE Caliburn G / KOKO Prime replacement coil is commonly supplied as:

4PCS Per Pack

Each pack contains four replacement coils of the selected resistance.

For this listing:

4 × 1.0Ω Caliburn G Coils

The package does not include:

• Caliburn device
• Pod cartridge
• E-liquid
• Charging cable
• Nicotine

Why Choose Uwell Caliburn G 1.0Ω Coils?

The Uwell Caliburn G and KOKO Prime 1.0Ω Coils provide a straightforward replacement option for users who prefer lower-power MTL vaping.

Key characteristics include:

• 1.0Ω resistance
• FeCrAl construction
• Tight MTL draw
• Approx. 10–15W operating range
• Moderate vapor
• Lower battery demand
• Rich-layered flavor positioning
• Press-fit installation
• Compatible with Caliburn G
• Compatible with KOKO Prime
• Compatible with KOKO Prime Vision
• Four coils per pack
• Suitable for pod-friendly e-liquid
• Separate from the 0.8Ω Meshed-H coil

Uwell Caliburn G 1.0Ω Coil Specifications

Who Are Uwell Caliburn G 1.0Ω Coils For?

These coils may suit adult users searching for:

• Uwell Caliburn G 1.0Ω Coils UAE
• Uwell KOKO Prime coils UAE
• Caliburn G 1 ohm coil
• KOKO Prime 1.0 ohm replacement coil
• Uwell Caliburn G coils 4PCS
• Caliburn G MTL coil Dubai
• Uwell 1.0Ω replacement coil
• KOKO Prime coils Dubai
• Caliburn G press-fit coil
• Uwell MTL coil UAE

Frequently Asked Questions

What resistance is this Caliburn G coil?

This version has a resistance of 1.0Ω.

Is the 1.0Ω Caliburn G coil mesh?

No. Uwell identifies it as a standard FeCrAl 1.0Ω coil. The 0.8Ω option is the UN2 Meshed-H coil.

What wattage is recommended?

The 1.0Ω coil is commonly rated for approximately 10–15W.

Is it designed for MTL vaping?

Yes. Uwell specifically positions it for tighter airflow, making it primarily an MTL coil.

Does it work with the Uwell Caliburn G?

Yes.

Does it work with the Caliburn KOKO Prime?

Yes. Uwell originally supplies the KOKO Prime with the 1.0Ω coil pre-installed.

Does it fit the KOKO Prime Vision?

Yes. Uwell officially lists the 1.0Ω Caliburn G coil for the KOKO Prime Vision.

How many coils come in one pack?

A standard UAE package contains 4 coils.

Can I use SaltNic with the 1.0Ω coil?

Yes, compatible pod-oriented SaltNic can be used. Choose nicotine strength carefully according to the e-liquid and device guidance.

Can I use freebase e-liquid?

Yes. Compatible balanced freebase e-liquid can also be used.

What VG/PG ratio is suitable?

A balanced 50VG/50PG or similarly pod-friendly formulation is generally a practical choice.

Is this the same as the 0.8Ω coil?

No. The 0.8Ω version uses Uwell’s UN2 Meshed-H construction and provides a looser, higher-output experience.

Is it the same as the 1.2Ω G2 coil?

No. The 1.2Ω coil is a separate Caliburn G2 Meshed-H option.

Does the pack include a pod?

No. This listing contains replacement coils only.

Uwell Caliburn G and KOKO Prime 1.0Ω Coils in Dubai, UAE

The Uwell Caliburn G and KOKO Prime Coils 1.0ohm in UAE provide a lower-power replacement option for adult users who prefer a tighter Mouth-to-Lung draw.

With 1.0Ω FeCrAl construction, approximately 10–15W operation, press-fit installation, restricted airflow, and four coils per pack, the coil is particularly well matched to the original Caliburn G and Caliburn KOKO Prime refillable pod systems.

When buying Uwell Caliburn G and KOKO Prime 1.0Ω Replacement Coils online in Dubai, Abu Dhabi, Sharjah, or across the UAE, confirm that you are selecting the 1.0Ω version rather than the 0.8Ω UN2 Meshed-H or newer 1.2Ω G2 coil.

For adults aged 18+ only. These replacement coils contain no e-liquid or nicotine. If used with nicotine-containing e-liquid, nicotine is an addictive substance.