Voopoo Coils PnP TM2 0.8Ω (5pcs/pack) Best In UAE

Voopoo Coils PnP TM2 0.8Ω (5pcs/Pack) Best In UAE

The VOOPOO PnP-TM2 0.8Ω Coils 5pcs/Pack are low-wattage mesh replacement coils designed for compatible devices using VOOPOO’s original PnP platform. With a recommended 12–18W operating range, the TM2 is primarily designed for Mouth-to-Lung (MTL) vaping, offering a more restricted draw and moderate vapor output compared with lower-resistance PnP coils.

Each pack contains 5 replacement PnP-TM2 coils and uses VOOPOO’s convenient Plug ‘n’ Play push-fit installation system. The 0.8Ω mesh construction makes the TM2 particularly suitable for compatible pod-friendly e-liquids and lower-power vaping setups.

Key Features of VOOPOO PnP-TM2 0.8Ω Coil

• Brand: VOOPOO
• Series: Original PnP
• Model: PnP-TM2
• Resistance: 0.8Ω
• Coil Type: Mesh / Single Mesh
• Recommended Wattage: 12–18W
• Vaping Style: MTL / Mouth-to-Lung
• VOOPOO Nicotine Guidance: ≤35mg
• Installation: Plug ‘n’ Play Push-Fit
• Pack Size: 5 Coils
• Replaceable: Yes
• Compatible Platform: Original VOOPOO PnP
• PnP X Coil: No
• E-Liquid Included: No
• Nicotine Included: No

What Is the VOOPOO PnP-TM2 Coil?

The PnP-TM2 is a higher-resistance replacement coil from VOOPOO’s original Plug ‘n’ Play coil family.

Its main specification is:

0.8Ω Mesh – 12–18W – MTL

The TM2 sits toward the low-power end of the PnP range.

Compared with coils such as the VM5 0.2Ω or VM6 0.15Ω, it operates at significantly lower wattage and produces a tighter, more controlled draw.

This makes it particularly relevant for users who prefer:

• Mouth-to-Lung vaping
• Lower wattage
• Moderate vapor
• Tighter airflow
• Lower battery consumption
• Pod-friendly e-liquid

0.8Ω Resistance

The PnP-TM2 has a resistance of:

0.8 Ohm

This relatively high resistance allows the coil to operate efficiently at only:

12–18W

Compared with low-resistance DTL coils, the TM2 generally requires:

• Less power
• Less airflow
• Less battery energy
• Lower e-liquid consumption

It is designed to provide a very different vaping style from the high-output VM5 or VM6 coils.

Mesh Coil Construction

VOOPOO officially identifies the PnP-TM2 as a Mesh Coil, while some official product documentation further describes it as Single Mesh.

Mesh heating provides a broad heating surface inside the coil.

In normal use, this can support:

• Even heating
• Consistent flavor
• Responsive vaporization
• Moderate vapor production
• Smooth low-power performance

Actual coil performance depends on e-liquid, airflow, device output, and proper priming.

Recommended 12–18W Power Range

The official operating range is:

12–18W

A sensible approach with a freshly installed coil is to begin around the lower end of the range.

For example:

1. Prime the fresh coil.
2. Install it securely.
3. Fill the compatible pod.
4. Allow the wick to saturate.
5. Begin around 12W.
6. Increase power gradually if desired.
7. Stay within 12–18W.

Always follow the wattage printed on your exact coil packaging if it differs.

Designed for Mouth-to-Lung Vaping

VOOPOO classifies the PnP-TM2 as an:

MTL Coil

Mouth-to-Lung vaping generally involves drawing vapor into the mouth before inhaling.

Typical MTL characteristics include:

• Restricted airflow
• Lower wattage
• Smaller vapor volume
• Higher-resistance coils
• Pod-oriented e-liquid

The 0.8Ω TM2 is therefore well suited to users who do not want an open Direct-to-Lung vaping style.

PnP-TM2 vs PnP-R1 0.8Ω

Both coils have the same resistance and wattage range, but they use different heating structures.

Feature	PnP-TM2	PnP-R1
Resistance	0.8Ω	0.8Ω
Power Range	12–18W	12–18W
Heating Type	Mesh	Regular / Dual Coil
Vaping Style	MTL	MTL
Nicotine Guidance	≤35mg	≤35mg

Choose according to the exact coil format recommended for your device and your preferred heating style.

PnP-TM2 vs PnP-TM1

The TM1 is a lower-resistance, higher-power option.

Feature	PnP-TM2	PnP-TM1
Resistance	0.8Ω	0.6Ω
Wattage	12–18W	20–25W
Vaping Style	MTL	MTL / Looser MTL
Power Demand	Lower	Higher
Vapor Output	Moderate	Higher

Choose the TM2 if you prefer lower power and a tighter MTL draw.

PnP-TM2 vs PnP-TR1

The TR1 has an even higher resistance.

Feature	PnP-TM2	PnP-TR1
Resistance	0.8Ω	1.2Ω
Power Range	12–18W	10–15W
Style	MTL	MTL
Vapor Output	Moderate	Lower
Power Demand	Low	Lower

The TM2 provides slightly more vapor and wattage flexibility.

PnP-TM2 vs PnP-VM4

The VM4 is more suitable for Restricted Direct-to-Lung vaping.

Feature	PnP-TM2	PnP-VM4
Resistance	0.8Ω	0.6Ω
Power	12–18W	20–28W
Style	MTL	RDL
Airflow	Restricted	More Open
Vapor	Moderate	Higher

The TM2 is the better choice for tighter MTL vaping.

PnP-TM2 vs PnP-VM5

These two coils are designed for very different output levels.

PnP-TM2

• 0.8Ω
• 12–18W
• MTL
• Moderate vapor

PnP-VM5

• 0.2Ω
• 40–60W
• DTL
• High vapor

The TM2 uses substantially less battery power and e-liquid.

Compatible With VOOPOO VINCI

VOOPOO officially lists the original:

VOOPOO VINCI

as compatible with the PnP-TM2.

The adjustable wattage of the VINCI allows it to operate within the coil’s 12–18W range.

Compatible With VINCI R and VINCI X

Official compatibility also includes:

• VOOPOO VINCI R
• VOOPOO VINCI X

These devices belong to VOOPOO’s original PnP generation.

Compatible With VINCI AIR

The VINCI AIR is also officially listed for the PnP-TM2.

Its compact format and lower-power operation make the 0.8Ω TM2 a suitable MTL replacement option.

Compatible With VOOPOO DRAG S and DRAG X

VOOPOO officially lists both:

• Original DRAG S
• Original DRAG X

as PnP-TM2 compatible devices when fitted with the correct original PnP pod.

Because these devices offer adjustable power and airflow, users can configure them for lower-output MTL vaping with the TM2.

Compatible With VOOPOO NAVI

The original VOOPOO NAVI is another officially supported device.

Users should still verify that the installed cartridge is designed for original PnP coils.

Compatible With ARGUS GT and ARGUS Air

VOOPOO’s official compatibility information also lists:

• ARGUS GT
• ARGUS Air

for the PnP-TM2 platform.

The exact tank or cartridge must support original PnP coils.

Compatible With V.SUIT

The VOOPOO V.SUIT is strongly associated with MTL vaping and officially supports the 0.8Ω PnP-TM2.

VOOPOO specifically promoted the TM2 in the V.SUIT as a low-power mesh option for stronger MTL flavor.

Compatible With DRAG Max

VOOPOO also lists:

DRAG Max

among compatible products.

As with other multi-coil devices, the installed pod must be the correct original PnP cartridge.

Official PnP-TM2 Compatible Devices

Official compatibility includes:

• VINCI
• VINCI R
• VINCI X
• VINCI AIR
• DRAG S
• DRAG X
• NAVI
• PnP Pod Tank 20
• PnP Pod Tank 22
• ARGUS GT
• ARGUS Air
• V.SUIT
• DRAG Max

Compatibility can depend on the exact pod or tank being installed.

Original PnP vs PnP X 0.8Ω

This distinction is extremely important.

The PnP-TM2 0.8Ω belongs to the:

Original PnP Platform

VOOPOO now also produces a:

PnP X 0.8Ω Coil

These are not the same product.

Feature	PnP-TM2	PnP X 0.8Ω
Resistance	0.8Ω	0.8Ω
Platform	Original PnP	PnP X
Power Range	12–18W	Around 12–16W
Legacy PnP Devices	Yes	No
PnP X Devices	No	Yes
Interchangeable	No	No

Do not purchase a replacement coil based only on the resistance printed on it.

Does PnP-TM2 Fit DRAG X2?

The newer VOOPOO DRAG X2 belongs to the PnP X platform.

Therefore, the original PnP-TM2 should not be treated as a DRAG X2 replacement coil.

Remember:

Original DRAG X = Original PnP

DRAG X2 = PnP X

Always check your exact device generation.

Suitable E-Liquid for PnP-TM2

The TM2 is a low-power MTL coil.

Balanced pod-friendly e-liquid such as:

50VG / 50PG

is generally a practical pairing.

Other suitable formulations may also work depending on the device and e-liquid manufacturer.

Extremely thick high-VG liquids may wick more slowly in compact MTL coils.

Can You Use SaltNic With PnP-TM2?

Yes.

VOOPOO’s official guidance lists:

Nicotine ≤35mg

for the PnP-TM2.

Its 0.8Ω resistance and 12–18W output make it considerably more suitable for nicotine salt than high-power DTL coils such as the VM5 or VM6.

Always select nicotine strength according to your individual requirements and the e-liquid manufacturer’s guidance.

Can You Use 50mg SaltNic?

VOOPOO’s official guidance for the TM2 is ≤35mg.

For that reason, 50mg exceeds the manufacturer’s current published recommendation for this coil.

Use an e-liquid concentration that remains within the guidance for the device and coil.

Can You Use Freebase E-Liquid?

Yes.

Compatible freebase e-liquid can also be used.

Lower-strength balanced formulations are generally more suitable than thick high-VG DTL liquids.

Plug ‘n’ Play Push-Fit Installation

The TM2 uses VOOPOO’s original:

Plug ‘n’ Play Push-Fit System

There are no threaded coil connections.

To replace the coil:

1. Remove the pod from the device.
2. Pull the old coil from the base.
3. Prime the fresh PnP-TM2.
4. Push it securely into place.
5. Fill the pod with compatible e-liquid.
6. Allow the wick to saturate.
7. Reinstall the pod.
8. Start near 12W.

How to Prime a New PnP-TM2 Coil

Proper priming can help prevent a burnt taste.

Before using a fresh coil:

1. Add a small amount of compatible e-liquid to visible cotton openings where practical.
2. Push the coil fully into the pod.
3. Fill the reservoir.
4. Allow approximately 5–10 minutes for saturation.
5. Begin at the lower wattage range.
6. Increase gradually if desired.

Avoid repeatedly firing a dry coil.

When Should You Replace the TM2 Coil?

Possible signs include:

• Burnt taste
• Reduced flavor
• Reduced vapor
• Persistent gurgling
• Increased leaking
• Darkened e-liquid
• Inconsistent heating

There is no guaranteed lifespan for every coil.

What Affects PnP-TM2 Coil Life?

Coil lifespan can depend on:

• E-liquid sweetness
• VG/PG ratio
• Wattage
• Puff duration
• Frequency of use
• Proper priming
• E-liquid level
• Storage conditions

Very sweet liquids can leave residue on the mesh more quickly.

Five Replacement Coils Per Pack

The VOOPOO PnP-TM2 is sold in a:

5PCS / Pack

Each package contains:

5 × 0.8Ω PnP-TM2 Replacement Coils

The pack does not include:

• Vape device
• Pod
• Tank
• Battery
• E-liquid
• Nicotine

Why Choose VOOPOO PnP-TM2 0.8Ω Coils?

The VOOPOO PnP-TM2 0.8Ω Coil provides a lower-power mesh option for compatible original PnP devices.

Key characteristics include:

• 0.8Ω resistance
• Mesh / Single Mesh heating
• 12–18W operating range
• MTL vaping
• Restricted airflow
• Moderate vapor production
• VOOPOO nicotine guidance ≤35mg
• Push-fit installation
• Original PnP compatibility
• Wide device compatibility
• 5 coils per pack
• Different from PnP-R1 0.8Ω
• Different from PnP X 0.8Ω

VOOPOO PnP-TM2 Specifications

Specification	Details
Brand	VOOPOO
Series	Original PnP
Model	PnP-TM2
Resistance	0.8Ω
Coil Type	Mesh / Single Mesh
Power Range	12–18W
Vaping Style	MTL
VOOPOO Nicotine Guidance	≤35mg
Installation	Plug ‘n’ Play Push-Fit
Pack Size	5PCS
Original DRAG X Compatible	Yes
Original DRAG S Compatible	Yes
VINCI Compatible	Yes, Selected Original Models
PnP X Coil	No
E-Liquid Included	No
Nicotine Included	No

Who Are VOOPOO PnP-TM2 Coils For?

These coils may suit adult users searching for:

• VOOPOO PnP-TM2 UAE
• PnP TM2 0.8 ohm coil
• VOOPOO 0.8Ω mesh coil Dubai
• PnP TM2 12–18W coil
• VOOPOO MTL coil UAE
• VINCI 0.8 ohm coil
• DRAG X MTL coil UAE
• VOOPOO PnP coils 5PCS
• V.SUIT replacement coil
• original PnP TM2 Dubai

Frequently Asked Questions

What resistance is the VOOPOO PnP-TM2?

The PnP-TM2 has a resistance of 0.8Ω.

What wattage should I use?

VOOPOO officially recommends 12–18W.

Is the PnP-TM2 a mesh coil?

Yes. VOOPOO identifies it as a Mesh / Single Mesh Coil.

Is PnP-TM2 designed for MTL or DTL?

VOOPOO officially classifies it as an MTL coil.

How many coils come in a pack?

The standard UAE package contains 5 coils.

Does it fit the original VOOPOO VINCI?

Yes. VINCI is included in VOOPOO’s official compatibility list.

Does it fit VINCI X and VINCI R?

Yes.

Does it work with DRAG S and DRAG X?

Yes, when using a compatible original PnP pod.

Does it work with V.SUIT?

Yes. V.SUIT officially supports the PnP-TM2.

Does it work with ARGUS Air?

Yes. ARGUS Air is listed among compatible PnP-TM2 products.

Is PnP-TM2 the same as PnP-R1 0.8Ω?

No. Both are 0.8Ω and rated around 12–18W, but the TM2 uses a mesh heating structure while the R1 is a different coil design.

Is it the same as PnP X 0.8Ω?

No. PnP X is a newer and different VOOPOO coil platform.

Can I use it in DRAG X2?

The DRAG X2 belongs to the PnP X ecosystem, so the original TM2 should not be treated as its replacement coil.

What nicotine strength does VOOPOO recommend?

VOOPOO lists nicotine ≤35mg for the PnP-TM2.

Can I use 50mg SaltNic?

VOOPOO’s current published guidance is ≤35mg, so 50mg is above the manufacturer’s recommendation.

Does the pack contain e-liquid?

No. These are replacement coils only.

VOOPOO PnP-TM2 0.8Ω Coils in Dubai, UAE

The Voopoo Coils PnP TM2 0.8Ω 5pcs/Pack in UAE provide a low-power mesh replacement option for compatible devices using VOOPOO’s original PnP platform.

With 0.8Ω resistance, Mesh/Single Mesh construction, 12–18W power, MTL performance, ≤35mg manufacturer nicotine guidance, push-fit installation, and five coils per pack, the TM2 is particularly suited to users who prefer a tighter, lower-output draw.

When buying VOOPOO PnP-TM2 0.8Ω Coils online in Dubai, Abu Dhabi, Sharjah, or across the UAE, verify that your device uses the original PnP system. Do not confuse this coil with the PnP-R1 0.8Ω or newer PnP X 0.8Ω coil.

For adults aged 18+ only. These replacement coils contain no e-liquid or nicotine. If used with nicotine-containing e-liquid, nicotine is an addictive substance.